# IDIPLOYER Nexus

<figure><img src="https://2978718896-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGYYKeStDMySe3v9HDpIo%2Fuploads%2FMjBSYw5UHmev4aHzH4FH%2Fimage.png?alt=media&#x26;token=e88f9570-9831-45d6-a239-a172e50e2ed9" alt=""><figcaption><p>IDIPLOYER Nexus </p></figcaption></figure>

{% hint style="info" %}
Please complete all the steps of this setup to ensure that your docking station works as intended.
{% endhint %}

## Unboxing and Hardware Setup

To get started with the IDIPLOYER docking station setup, please refer to this video:

{% embed url="<https://youtu.be/732hIfxVBP8>" %}
Nexus Unboxing guide
{% endembed %}

Here's a link to the documentation for the unboxing guide:

{% embed url="<https://idiployersupport.wixanswers.com/kb/en/article/idiployerunboxing>" %}

After the Docking station hardware is setup navigate to DiaB Setup Section to configure the DS and Drone on the FlytBase dashboard.

{% content-ref url="../../diab-setup" %}
[diab-setup](https://legacydocs.flytbase.com/diab-setup)
{% endcontent-ref %}